Laser LED

 LED  Comments Off
Feb 222013
 

The laser led is a small optical component that will product a laser beam.  There are red,blue,violet and infrared laser LED.

 Posted by at 02:01
Oct 122012
 

一般照明 (ダウンライト/ベースライト / 電球 / 街路灯 / 看板 他),演色性・高効率・長寿命が求められる一般用途の照明に適したLEDをラインナップ.

特殊照明 (演出照明 / サイン / 信号 / 懐中電灯 他),色調・配光のバリエーションを取り揃え様々な特徴に合わせた提案を可能にします

ディスプレイ (屋内ディスプレイ / 屋外ディスプレイ),使用環境や用途に応じて選択可能なフルカラー表示用LEDをラインナップ

車載 (車載外装 / 車載内装),車の高い安全性を支える高信頼性LED。

LCD バックライト(携帯電話 / ノートパソコン / モニタ etc.),液晶ディスプレイのバックライト光源として用途に応じたパッケージをラインナップ

Sep 272012
 

3mm系のハイパワータイプが出来ました。
2~15mAの電流で十分明るいです(推奨は2mA)。
◆外形3mm
◆発光色:青色
◆順方向電圧(V):3.8V(標準)(@75mA)
◆輝度:12000mcd(標準)(@75mA)
◆ドミナント波長:470nm(標準)(@75mA)
◆逆耐圧:5.0V
◆半減角:30°(狭角)
◆P:500mW
※1パック=10個入り
※ロットと入荷時期により明るさ、VF、色相が変わります。
ロットや電圧をそろえてのご注文はできません。

 

 

LED T8

 LED  Comments Off
May 252012
 

The LED T8 is one type of the LED tube lights.  The working  voltage is  220V.  The power are 8W, 12W,16W. The length are 2′, 3′, 4′ .

There are two type of LED T8, warm white (natural white) and cool white (pure white ) .

LEDs Have Come a Long Way

 LED  Comments Off
May 242012
 

 

LED lighting has been around since the early 1960s providing efficient and low-heat lighting for a number of applications. “LED” is an acronym that stands for “light emitting diode.” In their earliest days LED lights were normally little bulbs that emitted a glowing red light; these balls were installed in appliances and electronic gadgets as our indicators.

 

In terms of consumer use LEDs have recently become all the rage for exterior accent lighting, decorative Christmas lighting, and so on. Unfortunately, for a lot of Americans the early LEDs used in Christmas lights were not all that impressive.

 

The Difference between Then and Now

 

When Christmas light manufactures first started using LEDs the colors seemed very dull and uninspiring. Even the white lights, which were typically single-chip LEDs, glowed with a faintly yellowish color that made them look cheap and unattractive. For the first couple of years they were on the market they couldn’t make a dent against traditional lighting. But then manufactures found a way to change things.

 

Engineers realized that when you drive more current through an LED light it becomes less efficient. Therefore, more power does not necessarily mean a brighter result. Yet some manufacturers still tried overdriving their LEDs to get as much brightness out of them as possible. The results were less than satisfactory, to say the least.

 

Eventually engineers decided the solution wasn’t just more raw current, it was to add more semi conductor chips. In doing so they were able to increase power without destroying efficiency. Today it’s pretty common to find a 3 chip LED that emits bright white light or spectacular colors.

 

State-of-the-art 3 chip LED sets are gaining popularity among Christmas decorators because they are cheaper to purchase and operate, they produce less heat, and they’re more flexible in the types of things you can do with them. Between light nets, flexible strips, and programmable sets that can change color on-the-fly, the options are more exciting than they’ve ever been.

 

With the popularity these lights are enjoying one wonders how long traditional incandescent lighting will survive. Perhaps the days of the old-fashioned Christmas lights and bulbs are numbered.

 Posted by at 22:49  Tagged with:

LED Colors

 LED  Comments Off
May 242012
 

There are many colors of LED : colorful,cool white, warm whilte,red,green,amber,blue and so on.

Actually you can get any color of LED. Even the same white color, the color temparature may be different.

For example, there are 2000k warm white and 4000k warm white. The most used are warm white, then cool white, yellow and blue.

 Posted by at 06:45  Tagged with:

LED 5050

 LED  Comments Off
May 212012
 

The LED 5050 is one type of LEDs. The dimension of the chip is 50mm * 50mm. Another type LED is 3528. The LED 5050 is brighter and more powerful than 3528.

 Posted by at 06:07  Tagged with:

LED

 LED  Comments Off
May 212012
 

The LED  is a semiconductor light source. It’s light-emitting diode . LEDs  are semiconductor diodes, electronic devices that permit current to flow in only one direction. The diode is formed by bringing two slightly different materials together to form a PN junction.

 

 

In a PN junction, the P side contains excess positive charge (“holes,” indicating the absence of electrons) while the N side contains excess negative charge (electrons). When a forward voltage is applied to the semiconducting element forming the PN junction (heretofore referred to as the junction), electrons move from the N area toward the P area and holes move toward the N area. Near the junction, the electrons and holes combine. As this occurs, energy is released in the form of light that is emitted by the LED.

 

 Posted by at 03:40  Tagged with: